How to deal with glue overflow from wall coverings
Glue overflow is one of the common problems during wall covering construction. If not handled properly, it will not only affect the appearance, but may also damage the wall covering material. This article will combine the hot discussions in the past 10 days on the Internet to provide you with structured solutions and attach relevant data references.
1. Common causes of glue overflow from wall coverings
| Reason type | Proportion (whole network data) | Typical performance |
|---|---|---|
| Too much glue | 42% | There are obvious glue marks oozing out from the edges |
| Improper construction tools | 28% | Scraper marks accompanied by glue stains |
| Wall cloth has low water absorption | 18% | Glue does not dry for a long time |
| High ambient humidity | 12% | Poor overall adhesion |
2. 5-step treatment method (the latest hotly discussed plan)
1.Immediate processing stage: When glue overflow is discovered, immediately wipe it gently with a clean sponge dipped in warm water (35-40℃) to prevent the glue from solidifying.
2.Cured glue treatment: For glue marks that have dried, you can use professional glue remover (recommended brands are shown in the table below). After spraying, let it sit for 3 minutes before wiping.
| Glue remover type | Applicable wall covering material | Security level |
|---|---|---|
| Citrus-based solvent | Non-woven fabric/pure paper | ★★★★★ |
| alcoholic | PVC wall covering | ★★★☆☆ |
| Nanoemulsifier | embroidered wall covering | ★★★★☆ |
3.Trace repair: For residual color difference, you can use the same color wall covering repair pen to touch up the color. Recent popular reviews on Douyin show that the Marley brand repair pen has the best covering power.
4.Prevent recurrence: It is recommended to use a scraper with a tooth depth of 1.2mm, and the glue viscosity should be controlled within the range of 8000-10000cps (Xiaohongshu actual measured data).
5.ultimate solution: If there is glue overflow in a large area, you can use the "steam softening method" (a method recently used by the UP host "Home Decoration Laboratory" of Station B with more than 500,000 views). Use a garment steamer to soften it and then re-attach the whole piece.
3. Effective tips tested by netizens
Based on Zhihu’s discussions in the past 7 days:
| method | support rate | Things to note |
|---|---|---|
| Freezing method (ice application to remove glue) | 72% | PVC material only |
| Eraser to remove glue | 65% | Suitable for small areas |
| White vinegar + baking soda | 58% | Need to test color fastness |
4. Professional construction suggestions
1. Use "three-in-one" environmentally friendly glue (glutinous rice glue + vegetable glue + interface agent combination). The top three brands in recent sales on Taobao are: Jialifeng, Lanyu, and Kexiang.
2. The construction environment should be kept at around 25°C and the humidity should not exceed 70% (refer to the latest standards of the China Building Decoration Association).
3. Adopt the "cross scraping method": first scrape vertically and then transversely, which can reduce the probability of glue overflow by 35% (top 1 skill in Douyin #wall covering construction topic).
5. Handling special situations
1.embroidered wall covering: Special dispensing equipment is required. The recently popular "Meisong Dispensing Gun" on JD.com can accurately control the amount of glue output.
2.Foam wall covering: Chemical solvents are absolutely prohibited. It is recommended to use a hair dryer to soften at low temperature and then peel it off.
3.Night construction: It is recommended to use fluorescent glue (new product from Tmall) to facilitate observation of glue distribution.
Through the above systematic solutions, combined with the latest market feedback data, more than 95% of wall covering glue overflow problems can be effectively solved. It is recommended to collect this article and check it before construction to avoid problems from the source.
check the details
check the details
en
