How to calculate the curve of the cabinet? Detailed explanation of pricing methods and pitfall avoidance guide
Recently, among the hot topics on the Internet about decoration and building materials, the price calculation of customized cabinets has become the focus, especially "how to calculate the corner part in linear meter pricing" which has triggered a lot of discussion. This article combines industry standards and common consumer questions, and uses structured data to analyze them for you.
1. Basic concepts of linear meter pricing
Linear meter is a commonly used unit of measurement in the cabinet industry. 1 linear meter = 1 meter base cabinet + 0.5 meter wall cabinet + 1 meter countertop (standard combination). Corners often require additional calculations due to the complexity of sheet cutting and process involved.
| Pricing type | Standard part | Corner handling |
|---|---|---|
| Straight line meters | According to actual length × unit price | Not involved |
| L shaped corner | Calculate both sides separately | Deduct the overlap or add 15% |
| U-shaped layout | Three-sided segment calculation | An additional 10%-20% will be charged for each of the two corners. |
2. Comparison of corner pricing of mainstream brands
By sorting out the quotation policies of 10 mainstream cabinet brands, we found:
| Brand type | corner pricing rules | Additional fee description |
|---|---|---|
| OPPEIN/Sofia | Calculated based on 1.5 times the projected area | Basic model including hardware |
| Local custom manufacturer | Total price per linear meter × 1.2 coefficient | Does not include special hardware |
| Modular brands such as IKEA | Accumulated by single cabinet | Corner connectors are available for an additional fee |
3. Answers to high-frequency consumer questions
1. Why is there an extra charge for turning?
Corners require special processing: ① Install dust-proof corners ② Reinforce the load-bearing structure ③ The cutting loss rate of special-shaped tabletops is as high as 30%
2. How to avoid being billed twice?
The merchant is required to provide: ① Three-dimensional design drawings ② Sectional detailed quotation ③ Indicate the deduction rules for overlapping parts
3. Recommend alternatives
① Choose five-corner cabinets instead of right-angle corners (save 8%-12% cost)
② Adopt rotating basket design (increase the use area)
③ Make open shelving at the corner (no corner fee)
4. New industry trends in 2023
According to big data from a home furnishing platform:
•Smart pricing systemThe penetration rate has increased by 40%, and corner coefficients can be automatically identified
•Package quotationAccounting for 65% (such as "19,999 yuan package 10 linear meters including 3 corners")
•Dispute and complaint points"Untransparent pricing around corners" accounts for 27% of decoration complaints
5. Professional advice
1. Measure the corner dimensions before signing the contract
2. Compare the two quotation methods:
• Based on the total price per linear meter × coefficient
• Segment calculation + separate corner fee
3. It is required to keep 5%-10% of the final payment to be paid after acceptance.
Through the above structured analysis, it can be seen that the corner pricing of cabinets needs to focus on:Deduction rules, process instructions, hardware accessories includedThree major elements. It is recommended that consumers keep the "JJG Measurement Specifications for Building Materials" as a reference to protect their own rights and interests.
check the details
check the details
en
