How to install the screws in the cabinet
Among the hot topics in the past 10 days, home DIY and furniture assembly have become the focus of many netizens' attention. Especially the installation method of screws when assembling the cabinet has made many novices even more confused. This article will structure the steps for screw installation, tool selection, and frequently asked questions to help you easily assemble the cabinet.
1. Preparation of screw installation tool
Before you start assembling the cabinet, make sure you have the following tools ready:
| Tool name | use |
|---|---|
| Screwdriver (cross or one word) | For tightening screws |
| Electric screwdriver | Improve efficiency, suitable for a large number of screw installation |
| wrench | For fixing nuts |
| hammer | Auxiliary tapping screws or adjusting position |
| tape measure | Measure screw hole position |
2. Screw installation steps
Here are the detailed steps for installing screws when assembling the cabinet:
1. Check accessories
After opening the packaging, check whether the screws, nuts and other accessories are complete, and confirm whether the holes of the cabinet board are aligned.
2. Pre-installed screws
Gently insert the screw into the hole position and pre-twist a few turns with your hand to make sure the screw matches the hole position. If the screw is tight, you can gently tap the screw head with a hammer.
3. Tighten the screws
Use a screwdriver or electric screwdriver to tighten the screws. Be careful not to use excessive force to avoid damaging the board or screw thread.
4. Fix nut
If the screw needs to be used with a nut, first use the screw to pass through the hole, and then use a wrench to fix the nut.
5. Check the firmness
After the installation is complete, gently shake the cabinet and check whether the screws are firm. If loose, retighten.
3. Frequently Asked Questions and Solutions
| question | Solution |
|---|---|
| Screw Smooth | Replace new screws, or use pliers to remove the screws |
| Screw holes are not aligned | Adjust the position of the plate, or use a drill bit to expand the hole position |
| The screws cannot be screwed in | Check whether the screw model matches, or apply a small amount of lubricating oil |
| Screws are too long or too short | Replace screws of appropriate length |
4. Things to note
1. When installing screws, it is recommended to wear gloves to avoid scratching your hands.
2. If using an electric screwdriver, be careful to adjust the torque to avoid damaging the screws or plates.
3. During the assembly process, try to keep the cabinet horizontally to avoid skewed screws.
4. If the cabinet needs to bear load, it is recommended to use more screws to reinforce key parts.
5. Extension of hot topics
Recently, popular topics about home assembly include:
-How to quickly assemble IKEA furniture?: Many netizens share the assembly skills of IKEA furniture, especially the installation order of screws.
-Power Tools vs Manual Tools: The discussion on using an electric screwdriver or a manual screwdriver is very lively.
-Screw material selection: The advantages and disadvantages of stainless steel screws and ordinary screws have become the focus of hot discussion.
Through the above structured content, I believe you have a clearer understanding of the installation method of assembling cabinet screws. Whether a novice or a senior DIY enthusiast, mastering the correct screw installation skills can make the assembly process smoother.
check the details
check the details
en
